Logo files for printing: a plain-English guide

Most printing problems start with the logo file. This guide explains vector and raster files, how to tell which one you have, how to get a vector version, and what to send so your merchandise prints sharply.

What is a vector file? Vector vs raster in plain English

A vector file stores your logo as shapes: points joined by lines and curves, each filled with a colour. Because the shapes are described mathematically, the same file can be printed the size of a pen barrel or a banner and the edges stay crisp.

A raster file (also called a bitmap) stores your logo as a grid of tiny coloured squares called pixels. Photos are raster. Enlarge a raster image beyond its pixel size and the edges go soft, blurry or jagged, because there is no more detail to show.

This matters because most decoration methods are built from clean, separate shapes:

  • Screen printing pushes each colour through its own screen, made from that colour’s shapes. Vector artwork separates cleanly into colours. It is the usual method for calico and canvas bags.
  • Embroidery starts with digitising: your logo is turned into a stitch file that tells the machine where every stitch goes. Clean outlines give the digitiser the best start, which is why embroidered caps look sharpest from vector artwork.
  • Laser engraving follows the outlines in your file, so crisp paths give clean lines on metal pens.
  • Debossing presses a metal plate made from your artwork into the cover, as on PU notebooks. The plate needs solid, sharp shapes.

Raster artwork is fine for full-colour digital methods, such as heat transfers or dye-sublimated lanyards, and for photographs, as long as the resolution is high enough for the print size.

Which file types are vector and which are raster?

FormatTypeNotes
AIVectorAdobe Illustrator’s own format. The best file to send.
EPSVector (usually)An older, widely supported print format. It can also hold a pasted-in raster image.
PDFEitherVector only if it was exported from vector artwork. A PDF of a scan or a pasted image is raster inside.
SVGVectorThe web’s vector format. Opens in Illustrator, Inkscape and most browsers.
PNGRasterSupports a transparent background. A good fallback if it is large.
JPG / JPEGRasterNo transparency, and compression softens edges. Fine as a last resort.
GIFRasterLimited colours and usually small. Rarely suitable for print.
WEBPRasterA web image format, usually compressed and small.

Changing the extension does not change the file. Renaming logo.png to logo.svg, or opening a PNG and saving it as EPS, just wraps the same pixels in a new file.

How to tell if your logo is vector

  • The zoom test. Open the file and zoom in to 800% or more on a curved edge. Vector edges stay smooth; raster edges turn blocky or blurry.
  • Where it came from. If a designer made your logo in Illustrator, Affinity Designer, CorelDRAW or Inkscape, a vector master almost certainly exists. If you saved it from your website, an email signature or social media, it is raster.
  • Open it in a vector program. In Illustrator or Inkscape, a vector logo is made of separate shapes you can select one by one. A raster logo selects as a single image box.
  • Check PDFs carefully. A PDF can hold either kind. If the logo pixelates when you zoom in, it is a raster image inside a PDF.

How to get a vector version of your logo

Start with whoever created the logo. Vector files are made at the design stage, so they usually exist somewhere.

  • Ask your designer or agency for the master or source logo files in AI, EPS, PDF or SVG. Ask for the one-colour and reversed (white) versions at the same time.
  • Look in your brand guidelines, a marketing or brand assets folder, or the logo pack you received when the logo was made. A printer who has done your signage or business cards may also hold a vector copy.
  • From Canva. Canva’s help centre (checked November 2026) lists downloading as SVG and downloading with a transparent background as options limited to paid plans: Pro, Teams, Business, Education and Nonprofit. PDF Print, which exports at 300 dpi with bleed and crop marks, is not listed as restricted, but its CMYK colour profile option is a paid feature. Text and shapes built in Canva usually come through PDF Print as vector; a logo you uploaded as a PNG or JPG stays raster inside the file. Canva changes its plans from time to time, so check the options in its Download menu.
  • From Word or PowerPoint. A logo placed in a document or slide is almost always a PNG or JPG, often reduced in size. Saving the document as PDF does not convert it; the logo stays raster inside the PDF. Go back to the original file instead.
  • From Illustrator, Affinity Designer or Inkscape. Save as AI, or export as PDF, EPS or SVG. First convert any text to shapes: in Illustrator, Type > Create Outlines; in Affinity Designer, Layer > Convert to Curves; in Inkscape, Path > Object to Path.

How to convert a PNG to a vector file

If no vector version exists, there are two ways to make one.

Auto-tracing. Illustrator’s Image Trace and Inkscape’s Trace Bitmap (Path > Trace Bitmap) detect the edges in an image and turn them into paths. Online converters do the same thing. Tracing works best on simple, high-contrast logos with a few flat colours, from a large, sharp source image.

It has limits. From a small, blurry or heavily compressed image, a trace gives wobbly edges, rounded corners that should be sharp, stray specks and lettering that no longer matches the font. Gradients, shadows and photographic detail trace poorly. Always zoom in and check a traced file before you use it.

Redrawing. For a detailed logo, or one you will use for years, a designer can redraw it by hand over the original: rebuilding the curves, matching the typeface and setting exact colours. The result is a clean master file for every future job.

If you only have a PNG or JPG, send it anyway and tell us; we will check it and advise on the best way to get a print-ready file.

Colours: Pantone, CMYK and RGB explained

  • RGB and HEX describe colours on screens, mixed from red, green and blue light. A HEX code such as #1f3a5f is an RGB colour written for the web. Useful for your website, but not a print instruction: some bright screen colours cannot be matched exactly in ink.
  • CMYK is the four-ink process (cyan, magenta, yellow and black) used for full-colour printing, where tiny dots of each ink combine to make every colour.
  • Pantone (PMS), the Pantone Matching System, is a numbered library of standard colours, such as Pantone 2945 C. Screen and pad printers mix ink to the reference, so your colour stays consistent from order to order. That is why printers ask for Pantone references.

Embroidery uses the closest thread colour to your Pantone, and engraving and debossing take their colour from the material itself rather than ink. On fabric, the same ink can look slightly different on natural calico, cotton or polyester, or on a coloured base, because the material shows through. The mock-up and proof are the place to check colours. If you do not know your Pantone references, your brand guidelines usually list them; otherwise send HEX or CMYK values and we can suggest the closest match.

Logo checklist for promotional products

  • Fine detail and small text. Thin lines, small lettering and tight gaps may fill in, break up or disappear in embroidery, debossing or a small print area such as a pen barrel. A simplified version, such as the logo mark without the tagline, often works better on small items.
  • A one-colour version. Engraving and debossing are single-tone, and in screen and pad printing each extra colour needs its own screen or plate.
  • A white or reversed version for dark products, such as navy caps or black notebooks.
  • A transparent background, with no white box behind the logo: a PNG with transparency, or vector artwork with no background shape.
  • Fonts outlined. Convert text to outlines or curves so the lettering cannot change if the typeface is missing on another computer.
  • A flat version. Drop shadows, glows and gradients may need to be removed for screen printing, embroidery or engraving.

What to send us

  • Your vector logo if you have it (AI, EPS, PDF or SVG), with text outlined.
  • Otherwise, the largest, highest-resolution PNG you have, ideally with a transparent background.
  • Your Pantone references if you know them, or HEX or CMYK values.
  • Which version you would like (full colour, one colour or reversed) and where it should go on the product.

Every quote comes with a free digital mock-up showing your logo’s size, position and colours on the product before anything is made, and nothing goes into production until you approve the proof. Attach your logo to the quote form, or read how ordering works.

Logo file questions

What is a vector file?

A vector file stores an image as shapes made of points, lines and curves rather than pixels. Because the shapes are described mathematically, a vector logo can be enlarged or reduced to any size without going blurry. Common vector formats are AI, EPS, SVG and PDFs exported from vector artwork.

Is a PDF a vector file?

Sometimes. A PDF is a container that can hold vector shapes, raster images or both. A PDF exported from Illustrator, Affinity Designer or Inkscape is usually vector. A PDF made from a scan, a screenshot or a Word document with a pasted logo is raster inside. Zoom in on the logo: if the edges turn blocky, it is raster.

Can I convert a PNG to a vector file?

Yes, by tracing it. Illustrator’s Image Trace and Inkscape’s Trace Bitmap turn pixels into paths, and work best on simple, high-contrast logos from a large, sharp image. Small, blurry or detailed logos trace poorly, so a designer redrawing the logo by hand gives a cleaner result. Renaming a PNG to .svg or .eps does not make it vector.

Can I download a vector logo from Canva?

Canva’s help centre lists SVG downloads and transparent backgrounds as paid-plan options (Pro, Teams, Business, Education and Nonprofit). The PDF Print option is available more widely, but its CMYK colour profile is a paid option. Text and shapes built in Canva usually stay vector in a PDF Print file; a logo uploaded as a PNG or JPG stays raster.

What resolution does a PNG logo need for printing?

Aim for at least 300 dpi at the size it will be printed. As a rough guide, a logo printed 10 cm wide needs about 1,200 pixels across. A small logo saved from a website or email signature is usually far too small for print.

Do I need a vector file for embroidery?

Embroidery needs a stitch file, which a digitiser makes from your artwork. A vector file or a large, sharp image gives the digitiser the clearest outlines to work from. Very fine lines and small text may not stitch cleanly, so a simplified version of the logo often works better on caps and shirts.

Ready for a price?

Tell us the product, quantity and your logo. We reply with a quote and a free mock-up.

Request a free quote